The KDR cable entry system is a perfect system for installation and sealing of pre-fabricated cables.

The frame system is mounted into the control panel and is sealed by putting the sheet metals together. Subsequent alteration of the number of cables or of the cable diameters is very simple.
The KDR-frame system is used, where a multiplicity of cables has to be installed, e.g. on cabinets, walls of machine tools, control panels ..., flexible for bottom-, cover- and side walls.

The system is suitable for all switch- and control cabinets.

Application range:
KDR cable entry system is used for installation of pre-fabricated cables and hoses in the bottom area of switch- and control cabinets.

Function:
Pre-fabricated cables and/or hoses can be installed through the frame mounted at the bottom of the cabinet.
No extra elements are necessary for installation of cables.
The grommets assembled in the cable entry frames guarantee strain relief of the cables (observe the correct selection of grommet according to cable diameter).
 

• any combination of KDR-frame and sheet metal possible

• perfect transition of KDR-frame and frame of the cabinet

• perfectly fitted in any switch- and control cabinet

• KDR-system configured to cut-out size A (see order-example)

KT-Uni,  for cable diameter from 3 to 40 mm

example: 

A = 999 mm --> KDR 44999

Total length can be equipped as desired with any of the following types:

Included in delivery:
- KDR-frames according to required length
- End pieces (2 pieces)