KVT - split cable gland

Cable entry of pre-fabricated cables


KVT 32

  • The advantage of the split system featuring the split grommet (page 12/13) is the installation of pre-fabricated cables (ready-made cable loom) into machinery, plant, cabinets, walls. e.g. valve-connectors, computer-connectors, Sub-D-connectors.

  • The system is available in 3 sizes, which are determined by the bore hole
    e.g. with KVT 32, installation of connectors is possible, fitting through a
    max. bore diameter of 36 mm. With KVT 63, up to 65 mm.

  • KVT can be used for cable diameters from 3 to 34 mm.

  • Gasket is included.

KVT 25/32

KVT 63-4		  
KVT-split cable gland, thread length 14mm
typeorder#, grey

thread G

 for insert(s)
small / large		 p.u.
KVT 25 45201 M25 x 1,5 1/- 10
KVT 32 45202 M32 x 1,5 1/- 10
KVT 63-4* 45214 M63 x 1,5 4/- 5
KVT 63-1* 45211 M 63 x 1,5 -/1 5

 * locknut M63, brass nickel-plated, included in delivery

KGM SUB-D9		  
Locknut SUB-D9
typeorder#, grey

thread

 material p.u.
KGM-SUB-D9 45105 M32 x 1,5 PA 10

Locknut KGM-SUB-D9 for installation of SUB-D9-connectors.
Connectors to a max. width of 35,5 mm and a height of 16,0 mm can be installed.
Necessarily a hole of 36 mm would be required.

 

KVT 63-4

 

KVT 63-1 / KVT 63-4

Enables retro-fit of pre-fabricated cables through a hole of M 63
and fixing with a locknut M 63.
Inserts for KVT 63-1 (large) on pages 12
Inserts for KVT 63-4 (small) on pages 12/13

Specification:  material: PC
colour: similar to RAL 7035
protection to IP 54
UL 94 VO self-extinguishing
free of halogen and silicon